SCI Papers

-A +A
  • G.M. Mamedov, M.Karabulut, H. Ertap, O. Kodolbas, O. Oktu, A. Bacıoğlu, "Exciton photoluminescence photoconductivity and absorption in GaSe0.9Te0.1 alloys crystals", Journal of Luminescence vol. 129, 2009 s. 226- 230.
  • A. S. Kavasoglu, N. Kavasoglu, A. O. Kodolbas, O. Birgi, O. Oktu, S. Oktik, "Negative capacitance peculiarities in a-Si:H/c-Si rectifier structure ", 87(2) (2010) 108.
  • A. Bacıoglu, A.O. Kodolbas, Ö. Öktü, “Temperature Dependent Photoluminescence of PECVD a-SiOx:H (x<2)”, Journal of Luminescence, 2010, 30(10) 1730-1737.
  •  A. S. Kavasoğlu, Ö. Birgi, N. Kavasoğlu, G. Oylumoğlu, A. O. Kodolbaş, R. Kangı, O. Yılmaz, "Electrical characterization of a-Si:H(n)/c-Si(p) structure  " Journal of Alloys and Compounds, 509 (2011) 9394.
  • M. O. Reese, S. A. Gevorgyan, M. Jørgensen, E. Bundgaard, S. R. Kurtz, D. S. Ginley, D. C. Olson, M. T. Lloyd, P. Morvillo, E. A. Katz, A. Elschner, O. Haillant, T. R. Currier, V. Shrotriya, M. Hermenau, M. Riede, K. R. Kirov, G. Trimmej, T. Rath, O. Inganäs, F. Zhang, M. Andersson, K. Tvingstedt, M. Cantu, D. Laird, C. McGuiness, S. Gowrisanker, M. Pannone, M. Xiao, J. Hauch, R. Steim, D. M. DeLongchamp, R. Rösch, H. Hoppe, N. Espinosa, A. Urbina, G. Uzunoglu, J. Bonekamp, A. J.J.M. van Breemen, C. Girotto, E. Voroshazi and F. C. Krebs, "Consensus stability testing protocols for organic photovoltaic materials and devices", Solar Energy Materials and Solar Cells, 95(5) (2011) 1253.
  • D.M., Tanenbaum, M. Hermenau, E. Voroshazi, M.T. Llyou, Y. Galagan, B. Zimmermann, M. Hösel, H.F. Dam, M. Jorgensen, S.A. Gevorgyan, S. Kudret,       W. Maes, L. Lutsen, D.Vandersande, U. Würfel, R. Andriessen, R. Rösch, H. Hoppe, G. Teran-Escobar, M. Lira-Cantu, A. Rivaton, G.Y. Uzunoğlu, D. Germack, B.Andreasen,  M.V. Madsen, K. Norrmany and F.C. Krebs, “The ISOS-3 inter-laboratory collaboration focused on the stability of a variety of organic photovoltaic devices”, RSC Advances, 2012, 2, 882–893.
  •  R. Rösch, D.M. Tanenbaum, M. Jorgensen, M. Seeland, M. Baerenklau, M.Hermenau, E. Voroshazi, M.T. Lloyd, Y. Galagan, B. Zimmermann, U. Würfel, M.Hösel, H.F. Dam, S.A. Geworgyan, S. Kudret, W. Maes, L. Lutsen, D.Vanderzande, R. Andriessen, G. Teran-Escobar, M. Lira-Cantu, A. Rivaton, G.Y.Uzunoğlu, D. Germack, B. Andreasen, M.V. Madsen, K. Norman, H. Hoppe and F. Krebs, “Investigation of the degradation mechanisms of a variety of organic photovoltaic devices by combination of imaging techniques—the ISOS-3 inter-laboratory collaboration” Energy Environ. Sci., DOI:10.1039/c2ee03508a, 2012.
  • E. Tekin, “The blend ratio effect on the photovoltaic performance and stability of poly (3-hexylthiophene):[6,6]-phenyl-C61 butyric acid methyl ester (PCBM) and poly(3-octyl thiophene):PCBM solar cells”  Solar Energy Materials & Solar Cells 100 (2012) 174–184.
  • Nesrin Tore, Elif Alturk Parlak, Ozlem Usluer, DanielA.M.Egbe, SaitE.San, Pelin Aydogan,” Effect of blend ratio on poly(p-phenylene-ethynylene)-alt-poly (p-phenylene-vinylene) polymer solar cell”, Solar Energy Materials & Solar Cells,104 (2012), 39-44.
  • Monica Lira-Cantu, Gerardo Teran-Escobar, David M. Tanenbaum, Eszter Voroshazi, Martin Hermenau, Kion Norrman, Matthew T. Lloyd, Yulia Galagan, Birger Zimmermann, Markus Hösel, Henrik F. Dam, Mikkel Jørgensen, Suren Gevorgyan, Laurence Lutsen, Dirk Vanderzande, Uli Würfel, Ronn Andriessen, Roland Rösch Harald Hoppe, Agnès Rivaton, Gülşah Y. Uzunoğlu, David Germack, Birgitta Andreasen, Morten V. Madsen, Eva Bundgaard and Frederik C. Krebs On the stability of a variety of organic photovoltaic devices by IPCE and in-situ IPCE analyses - The ISOS-3 inter-laboratory collaboration. Physical Chemistry Chemical Physics, DOI:10.1039/C2CP40821J, 2012.
  • Aydogan P., Menda D., Parlak E.A., Ozdemir O., Kutlu K., "Excess Current/Capacitance Observation on Polymer-Fullerene Bulk Heterojunction, Studied Through I-V and C/G-V Measurements”, Solar Energ.Sol.Mat ., 103, 199-204 (2012).
  • Mucur, S.P., Tumay, T.A., San, S.E., Tekin, E., “Enhancing effects of nanoparticles on polymer_OLED performances”, J.Nanopart.Res. (2012) 14:1214.
  • Elif Alturk Parlak, Tülay Aslı Tumay, Nesrin Töre, Şerife Sarıoğlan, Pelin Kavak, Figen Türksoy, “Efficiency improvement of PCDTBT solar cells with silver nanoparticles” Solar Energy Materials & Solar Cells 110 (2013) 58–62.
  • Ö.Pehlivan, O.Yılmaz, A.O. Kodolbaş,M.Tomak, “Structural Characterization of intrinsic a-Si:H thin Film for Silicon Heterojunction solar Cell”, Journal of Optoelectronics and Advanced Materials, Vol.15, No.1-2, January-February 2013, p.22-24.
  • Josiah A. Bjorgaard and Muhammet E. Köse, “Amplified quenching of conjogated polymer nanoparticale photoluminescence for robust measurement of exciton diffusion length”, Journal of Applied Physics, 113, 203707 (2013).
  •  Josiah A. Bjorgaard and Muhammet E. Köse, “Theoretical Study of Torsional Disorder in Poly(3-alkylthiophene) Single Chains: Intramolecular Charge-Transfer Character and Implication for Phoetvoltaic Properties”, J.of Phys.Chem.A 2013, 117, 3869-3876.
  • Baris Yilmaz, Josiah Bjorgaard, Christopher L. Colbert, Jay S. Siegel and Muhammet E. Köse, “Effective Solublilization of Single-Walled Carbon Nanotubes in THF Using PEGylated Corannulene Dispersant”, ACS Appl.Mater.Interfaces 2013, 5, 3500-3503.
  • Emine Tekin, “Influences on the white emission and stability of single layer electroluminescent devices”, Journal of Luminescence, 144 (2913), 69-73
  •  Yongjun Li, Muhammet Erkan Kose and Kirk S. Schanze, Intramoleculare Triplet Energy Transfer in Anthracene-based Platinium Acetylide Oligomers, J.Phys.Chem., DOI:10.1021/jp4032173, 2013.
  • Ali Veysel Tunc, Andrea N. Giordano, Bernhard Ecker, Enrico Da Como, Benjamin J. Lear and Elizabeth von Haouff, “Silica Nanoparticles for Enhanced Carrier Transport in Polymer-Based Short Channel Transistors”, J.Phys. Chem. C 2013, 117, 22613-22618.
  • Serhat Odabas, Emine Tekin, Figen Turksoy and Cihangir Tanyeli, Inexpensive and valuable: a series of new luminogenic molecules with the tetraphenylethene core having excellent aggregation induced emission properties, ,* Journal of Materials Chemistry C, 1 (2013) 7081-7091
  • Gulcin Haykir, Emine Tekin, Taner Atalar, Figen Türksoy, Highly efficient non-doped blue organic light emitting devices based on anthracene–pyridine derivatives, Thin Solid Films 548 (2013) 171-177
  • Alpay Kimyonok*, Emine Tekin, Gülçin Haykır, Figen Turksoy, Synthesis, Photophysical and Electroluminescence Properties of Anthracene-Based Green-Emitting Conjugated Polymers, Journal of Luminescence 146 (2014) 186–192
  • Selin Pıravadılı Mucur, Daniel Lenkeit, Ioannis Kanelidis, Sait Eren San, Elisabeth Holder, Emine Tekin, Enhancing the device performance of a blue light-emitting copolymer using CdSe/ZnS quantum dots, Journal of Polymer Science Part B: Polymer Physics, 52(2014), 147–156,
  • Ipek Osken, Ali Senol Gundogan, Emine Tekin, Mehmet S Eroglu, and Turan Ozturk, Fluorene–Dithienothiophene-S,S-dioxide Copolymers. Fine-Tuning for OLED Applications, Macromolecules,  DOI: 10.1021/ma4016592.
  • “An efficient organic inverted solar cell with AnE-PVstataCBM active layer and V2O5/Al anode layer’’ N. Töre, A.Kosemen, E.A.Parlak, Zuhal Alpaslan, Christoph Ulbrich, Daniel Egbe, Yusuf Yerli, Sait Eren San, Solar Energy, 99 (2014) 88-94.
  • Round robin performance testing of organic photovoltaic devices, S. A. Gevorgyan, O. Zubillaga , J. Seoane , M. Machado, E.A Parlak, N. Tore , E. Voroshazi,, T. Aernouts, H. Müllejans, G. Bardizza, N. Taylor, W. Verhees, J. M. Kroon, P. Morvillo, C. Minarini, F. Roca, F. A. Castro, S. Cros, F. Trigo , Frederik C. Krebs, Renewable Energy 63, (2014) 376-387
  • Şenol Yıldız, Volkan Enç, Mustafa Kara, Yasemin Tabak, Emine Acet, Airbone Microbial Contamination Assesment of the Potential Risks in Solid Recovered Fuel Plants: A Case Study in Istanbul, Environmental Engineering and Management Journal (accepted paper)
  • Bakan HI, Celiss J.P.,Fretting Behaviour of 316L Stainless Steel Produced by Powder Injection Moulding ,Kovove Mater., 50 (2012) 33
  • Kayhan M., Hildebrandt E., Frotscher M., Senyshyn A., Hofmann K., Alff L., Albert B, Neutron diffraction and observation of superconductivity for tungsten borides, Solid State Sciences, 14, 11–12, 1656-1659, 2012.
  • Topal U, Bakan HI, Improvement Of The Magnetic Properties Of Highly Porous Open-Celled Magnets, J. European Ceramic Society, 31/ 783, 2011
  • Mustafa Kara, Esin Günay, Yasemin Tabak, Şenol Yıldız, Volkan Enç, Development of RDF for Cement Factories in Turkey, Combustion Science and Technology, 183: 203–219, 2011.
  • Kayhan M., Yilmaz A, Effects of Synthesis, Doping Methods and Metal Content on Thermoluminescence Glow Curves of Lithium Tetraborate, Journal of Alloys and Compounds, 509/ 7819-7825, 2011
  • Topal U, Bakan HI, Magnetic properties and remanence analysis in permanently   magnetic BaFe12O19 foams, Journal of the European Ceramic Society, 30, 3167- 3171, 2010
  • Topal U and Bakan HI, Permanently Magnetic BaFe12O19 Foams: Synthesis and Characterization, “Materials Chemistry and Physics”, Vol. 123, (2010),  121-124. 
  • Korkmaz K. and Bakan HI,   Process And Properties of TiC0.7N0.3-Based Cermet Coating Deposition On Steel By Electrospark Deposition Technique, “Kovove Mater.” 48 (2010) 153–158.
  • S. Eroglu, “Sintering and Mechanical Properties of AISI M2 High-Speed Steel Powder Molded at Low Pressures”, Materials and Manufacturing Processes, 25: 1025–1029, 2010.
  • A. Christogerou, T.Kavas, Y. Pontikes, S. Koyas, Y.Tabak and G.N. Angelopoulos, “ Use of Boron Wastes in The Production of Heavy Clay Ceramics”, Ceramic International, Cilt: 35, No: 1, Sf: 447-452, 2009
  • Mustafa Kara, Esin Günay, Yasemin Tabak, Şenol Yıldız, Perspectives for pilot scale study of RDF in Istanbul, Turkey, Waste Management, Waste Management , Volume 29, Issue 12, December 2009, Pages 2976-2982
  • Mustafa Kara, Esin Günay, Yasemin Tabak, Şenol Yıldız, İstanbul’un Çöpleri Çimento Fırınlarında Ek Yakıta Dönüşüyor, Bilim ve Teknik Dergisi, Yıl: 42 Sayı: 499, Sayfa:68-71, Haziran 2009
  • Topal U., Ozkan H., Bakan HI, Cankur O, Topal K., Evolution of Magnetic and Structural Properties of TiO2 with Co – Doping, “J.  Non-Crytalline Solids”, 354,(2008), 1678-1682
  • Bakan HI, Injection Molding of Alumina with a Partially Water Soluble Binder System and Solvent Debinding Kinetics, Materials Science and Technology, 23-7/787, 2007
  • Bakan HI, A Novel Leaching and Sintering Process for Manufacturing Highly Porous Stainless Steel, Scripta Materiali, 55/ 203,206,  2006
  • Okutan M.,  Yakuphanoglu F., Bakan HI , and  F.Inanir, Space Charge Limited Conduction and Determination of Density of Localised States in Semiconductor Cobalt Doped TiO2, “Materials Science and Technology”,  21(11), (2006), 123-126.
  • Eroglu S. and Bakan HI, Solvent Debinding Kinetics And Sintered  Properties of Injection Molded 316L Stainless Steel Powder, “Powder Metallurgy”, 48, (2005), 4, 329-332.
  • Okutan M., Bakan HI, Korkmaz K.,Yakuphanoğlu F.,Variable Range Hopping Conduction and Microstructure Properties of Semiconducting Co-Doped TiO2  “PHYSICA –B”  Vol. 355, (2005), p.176-181.
  • Eroglu S. , Bakan HI, Thermodynamic Analysis of Mo2C Powder Synthesis by Chemical Vapor Reaction Method, “Key Engineering Materials”. 264-268,( 2004), 121-124
  • Bakan HI, Gunes M, Development of Water Soluble Binder Systems for Low Pressure Injection Molding of Alumina, “Key Engineering Materials”. 264-268, (2004),  313-316.
  • Mindivan H., Bakan HI, Cimenoglu H, Kayalı ES, Wear Behaviour of SiC, Cr3C2 and WC Doped Alumina, “Key Engineering Materials”. 264-268, (2004),  469-472.
  • Boyraz T, Kılıç, A, Ertuğ B, Tavsanoğlu T, Karakas Y, Addemir O., The Characterization of Metal-Ceramic Interfaces in Porcelain Teeth, Key Engineering Materials, Vol. 264-268, pp. 683-686, 2004
  • Bakan HI, and Kayalı ES, Effect of Oxygen Content and Stearate Additives on Sintering Characteristics of Cu-25Cr Composite, “Powder Metallurgy” , (2003),46, No:3, p:259-264.
  • Bakan HI, Heaney D, German R.M, The Effect of Nickel Boride and Boron Additions on the Sintering Characteristics of Injection Molded 316L Powder Using Water Soluble Binder System, Powder Metallurgy, 44-3/ 235, 2001
  • Bakan HI, Jumadi Y, Messer P.F, Davies H, Ellis B, Study of Processing Parameters for MIM Feedstock Based on Composite PEG-PMMA Binder, “Powder Metallurgy”, (1998), Vol.41,No:4, p:119- 121.
  • Y. Birol, Evolution of grain structure across joints in friction stir welded EN AW 5083 H111 plates during thermal exposure, Materials Science and Technology, DOI: 10.1179/1743284713Y.0000000272.
  • Y. Birol, S. Kasman, Effect of welding parameters on microstructure and mechanical properties of friction stir welded EN AW 5083 H111 plates, Materials Science and Technology, DOI: 10.1179/1743284713Y.0000000280.
  • Y. Birol, S. Kasman, Effect of welding parameters on the microstructure and strength of friction stir weld joints in twin roll cast EN AW Al-Mn1Cu plates Journal of Engineering Materials and Performance, DOI: 10.1007/s11665-013-0607-y.
  • Y. Birol, Low temperature synthesis of MgB2 via powder metallurgy processing, Journal of Thermal Analysis and Calorimetry, DOI: 10.1007/s10973-013-3258-1.
  • Y. Birol, Efficiency of binary and ternary alloys from the Al-Ti-B system in grain refining aluminium foundry alloys, International Journal of Cast Metals Research, DOI 10.1179/1743133613Y.0000000064.
  • Y. Birol, Design of potent grain refiners for wrought aluminium alloys, International Journal of Cast Metals Research, DOI 10.1179/1743133613Y.0000000060.
  • Y. Birol, F. Birol, B. Yüksel, Ö. Duygulu, “Corrosion behaviour of twin-belt cast EN AW 7075 alloy”, Mater. Corr. DOI: 10.1002/maco.201206521.
  • Y. Birol, Response to thermal exposure of ball milled Cu-Mg/B2O3 powder blends, Metallurgical and Materials Transactions B, 44 (2013) 969-973.
  • Y. Birol, “Impact of grain size on mechanical properties of AlSi7Mg0.3 alloy”, Materials Science and Engineering, 559 (2013) 394-400.
  • Y. Birol, “Optimization of homogenization for EN AW 6060 extrusion alloy” Materials Characterization, 80 (2013) 69-75.
  • Y. Birol, “Response to thermal exposure of ball milled aluminium-borax powder blends”, Materials and Metallurgical Transactions B, 44B (2013) 359-364.
  • Y. Birol, “Formation of pinch marks on pack rolled aluminium foil”, Engineering Failure Analysis, 28 (2013) 82-89.
  • Y.Birol, “evolution of globular microstructures during processing of aluminium slurries”, Transactions of Nonferrous Metals Society of China, 23 (2013) 1-6.
  • Y. Birol, “sliding wear of CrN, AlCrN and AlTiN coated AISI H13 hot work tool steels in aluminium extrusion”, Tribology Int. 57 (2013) 101-106.
  • Y. Birol, “Homogenization of EN AW 6005A for improved extrudability”, Materials and Metallurgical Transactions A, 44 (2013) 504-511.
  • Y. Birol, “Effect of cooling rate on precipitation during homogenization cooling in an excess silicon AlMgSi alloy”, Materials Characterization, 73 (2012) 37-42.
  • Y.Birol, “Aluminothermic reduction of B2O3 for the manufacture of of Al-B alloys”, Materials Chemistry and Physiscs, 136 (2012) 963-966.
  • Y. Birol, “Performance of Al-5Ti-1B and Al-3B grain refiners in investment casting of AlSi7Mg0.3 alloy with preheated ceramic moulds”, International Journal of Cast Metals Research, 25, 5 (2012) 296-300.
  • Y.Birol, B. Yüksel, “Performances of gas nitrided and AlTiN coated AISI H13 hot work tool steel in aluminium extrusion”, Surface and Coatings Technology, 207 (2012) 461-466.
  • Y. Birol, “Effect of solute Si and Cu on grain size of aluminium alloys”, International Journal of Cast Metals Research, 26, 1 (2013) 22-27.
  • Y. Birol, “Effect of solute Mg on grain size of aluminium alloys”, Materials Science and Technology, 28, 8 (2012) 924-927.
  • P. Erdoğan, Y. Birol, “Effect of processing parameters on structural features of anodic aluminium oxides”, Applied Physics A, 108 (2012) 587-592.
  • Y. Birol, “Heat treatment of thixoformed EN AW 7075 alloy”, Materials Science and Technology, 28 (2012) 651-657.
  • Y. Birol, “Potential of cast EN AW 7075 billet as thixoforging feedstock”, Materials Science and Technology, 28, 5 (2012) 553-559.
  • Y. Birol, AlB3 master alloy to grain refine AlSi10Mg and AlSi12Cu aluminium foundry alloys, Journal of Alloys and Compounds, 513 (2012) 150-153.
  • Y. Birol, Grain refinement of Al-Cu foundry alloys with B additions, International Journal of Cast Metals Research, 25 (2012) 117-120.
  • Y. Birol, Heat Treatment of twin belt cast EN AW 7075 alloy, Materials Characterization, 63 (2012) 1-8.
  • Y. Birol, Analysis of wear of a gas nitrided H13 tool steel die in aluminium extrusion, Engineering Failure Analysis, 26 (2012) 203-210.
  • Y. Birol, Isothermal oxidation of plasma nitrided hot work tool steel at 750 C, Materials at High Temperatures, 29 (2012) 17-22.
  • P. Erdoğan, B. Yüksel, Y. Birol, Effect of chemical etching on the morphology of anodic aluminium oxides in the two-step anodization process, Applied Surface Science, 258 (2012) 4544-4550.
  • Y. Birol, “Impact of interannealing on recrystallization during final annealing of twin belt cast AlFeSi sheet”, International Journal of Materials Research, 103 (2012) 992-997.
  • Y. Birol, Age hardening of EN AW 2014 alloy extruded in the semi solid state, Materials Chemistry and Physiscs, 131 (2012) 694-697.
  • Y. Birol, Interaction of grain refinement with B and modification with Sr in aluminium foundry alloys, Materials Science and Technology, 28 (2012) 70-76.
  • Y. Birol, Response to T6 treatment of extruded and thixoformed EN AW 2014 alloys, Materials Science and Engineering, A528 (2011) 5636-5641.
  • Y. Birol, Response to thermal cycling of duplex-coated hot work tool steels at elevated temperatures, Materials Science and Engineering, A528 (2011) 8402-8409.
  • Y. Birol, Performance of AlTi5B1, AlTi3B3 and AlB3 master alloys in refining the grain structure of aluminium foundry alloys, Materials Science and Technology 28 (2012) 481-486.
  • Y. Birol, D. Isler ve M. Urgen, High temperature sliding wear testing of AlTiN and AlTiON-coated tool steels, Metallurgical and Materials Transactions 42 (2011) 3316-3322.
  • Y. Birol ve A. Kayihan, Thermal fatigue testing of plasma transfer arc Stellite coatings on hot work tool steels under steel thixoforming conditions, Metallurgical and Materials Transactions 42 (2011) 3277-3283.
  • Y. Birol, Effect of Si in grain refinement of hypoeutectic Al-Si alloy with Ti and B additions, Materials Science and Technology 28 (2012) 385-389.
  • Y. Birol, Grain refinement of pure aluminium and Al-7Si alloy with an Al-3B master alloy, Materials Science and Technology 28 (2012) 363-367.
  • Y. Birol, E.A. Guven and L. Capan, Extrusion of EN AW-2014 alloy in the semi-solid state, Materials Science and Technology 27 (2011) 1851-1857.
  • Y. Birol, Isothermal and cyclic oxidation of plasma-nitrided hot work tool steels at elevated temperatures, Oxidation of Metals 76, 5-6 (2011) 399-417.
  • Y. Birol, Thixoforming of EN AW-2014 alloy at high solid fraction, Journal of Materials Processing Technology 211 (2011) 1749-1756.
  • Y. Birol, An improved halide salt process to produce Al-B master alloys, Materials Science and Technology 27 (2011) 1846-1850.
  • Y. Birol, Thermal cycling of yttria stabilized zirconia coated hot work tool steel, Journal of Thermal Spray Technology 20 (2011) 1110-1117.
  • Y. Birol and D. Isler, Abrasive wear performance of AlCrN-coated hot work tool steel at elevated temperatures under three-body regime, Wear 270 (2011) 281-286.
  • Y. Birol, Effect of post-oxidation treatment on thermal fatigue behaviour of plasma nitrided hot work tool steel at elevated temperatures, Surface & Coatings Technology 205 (2011) 2763-2769.
  • Y. Birol, A novel C-free Co-based alloy for high temperature applications, Materials Science & Engineering A528 (2011) 1117-1124.
  • Y. Birol, Metallographic investigation of a hot tear in an Al-Zn-Mg billet, International Journal of Cast Metals Research 24 (2011) 1-5.
  • Y. Birol and D. Isler, Thermal cycling of AlTiN and AlTiON-coated hot work tool steels at elevated temperatures, Materials Science & Engineering A528 (2011) 4703-4709.
  • Açıkalın E., Atıcı O., Sayıntı A., Çoban K., Erkalfa H., (2013). Preparation of Dendritic Waterborne Poly(urethane-urea)/ Ni-Zn  Ferrite Composites and their Microwave Absorption Properties, Progress in Organic Coatings, 76, 972–  978.
  • Vertiy A., Sayinti A., Açikalin E., Çoban K. (2013). Complex Dielectric Coefficient of Breast Phantom Prepared For Breast Cancer Detection, Physica Polonica Acta A,2,123
  •  Açıkalın E., Atıcı O. (2012) Preparation of Linear Waterborne Polyurethane Nanocomposites and Effect of Clay on UV Degradation, Polyurethane Magazine International, Issue 5, pp. 324-328.
  •  Sezer E., Kızılcan N., Çoban K.,“Application of Ketone-Based Resins as Anticorrosive  Coating “International Journal of Electrochemistry, Volume 2011, Article ID 253404, 9 pages   doi:10.4061/2011/253404.
  • Öncül A., Çoban K.,Sezer E., Şenkal B. F.,” Inhibition of the corrosion of  Stainless steel by poly-N-vinylimidazole and N-vinylimidazole.” Progress in Organic Coatings” 71(2011), 167-172.
  • Sezer E., Ustamehmetoğlu B., Bayır Z.A., Çoban K., and Kalkan A.,  “Corrosion Inhibition Effect of 4-(2-Diethylamino-Ethylsulfonyl)-Phthalonitrile and 4, 5-Bis(Hexylsulfonyl)-Phthalonitrile”, International Journal of Electrochemistry Volume 2011,  Article ID 235360, 5 pages, doi:10.4061/2011/235360.
  • Sezer E., Kızılcan N., Çoban K.,“Application of Ketone-Based Resins as Anticorrosive  Coating “International Journal of Electrochemistry, Volume 2011, Article ID 253404, 9 pages   doi:10.4061/2011/253404.
  • Cengiz H., Aydoğan B., Ateş Ş., Açıkalın E., Yağcı Y. (2011). Intramolecular Crosslinking of Polymers by Using Difunctional Acetylenes via Click Chemistry, Designed Monomers and Polymers, 14, 69-78.
  • Yüksel B., Kırtay S., Özkan T.O., Açıkalın E., Erkalfa H. (2008). The Effect of B2O3 Addition to the Microstructure and Magnetic Properties of Ni0.4Zn0.6Fe2O4 Ferrite, Journal of Magnetism and Magnetic Materials, 320, 714-718.
  • M. F. Huseyinoglu, S. R. Allakhverdiev, Z. Salaeva, A. Secgin, K. R. Allakhverdiev, "The possibility of using remote sensing technology of lidars for monitoring ecosystem health by detecting habitat condition", Proc. of SPIE Vol. 8677 (2013) doi: 10.1117/12.2014217.
  • M. F. Huseyinoglu,  Z. Salaeva, A. Secgin, K. R. Allakhverdiev, "Preliminary Results from the New Multiwavelength Aerosol Lidar Scanning System", Proc. of SPIE Vol. 8677 (2013) doi: 10.1117/12.2014958.
  • Veselovskii, O. Dubovik, A. Kalgotin, M. Korenskiy, D. N. Whiteman, K. R. Allakhverdiev, M. F. Huseyinoglu, "Linear estimation of particle bulk parameters from multi-wavelength lidar measurements", Atmos. Meas. Tech., 5 (2012), 1135-1145.
  • Papayannis, R. E. Mamouri, P. Kokkalis, V. Amiridis, N. I. Kristiansen, A. Stohl, D. Balis, E. Giannakaki, D. Nicolae, G. Tsaknakis, L. Belegante, A. Nemuc, I. Veselovskii, M. Korenskiy, K. R. Allakhverdiev, M. F. Huseyinoglu, T. Baykara, "Optical properties and vertical extension of aged ash layers over the Eastern Mediterranean as observed by Raman lidars during the Eyjafjallajökull eruption in May 2010", Atmos. Env., 48 (2012), 56-65.
  • K. R. Allakhverdiev, T. K. Baykara, M. Bekbolet, M. F. Huseyinoglu, S. Ozbek, Z. Salaeva, A. Secgin, S. Vartapetov, I. Veselovskii, M. Korenskiy, "Preliminary Results from the New Multiwavelength Aerosol LIDAR in Turkey", Fizika, 16 (2009), 22-25.
  • K. R. Allakhverdiev, T. K. Baykara, A. Secgin, S. Ozbek, A. M. Ulubey, Z. Salaeva, M. F. Huseyinoglu, S. L. Druzhinin, K. A. Konovalov, V. Y. Shchagin, O.N. Smirnov, S. Yu. Strakhov, E. V. Perkina, "Compact Raman (CLS) Spectrometer for Active Test of Liquids and Solid Samples", Fizika, 16 (2009), 46-50.
  • D. D. Erbahar, M. Harbeck, G. Gümüş, I. Gürol, V. Ahsen, “Self-assembly of phthalocyanines on quartz crystal microbalances for QCM liquid sensing applications”, Sensors and Actuators B: Chemical, gönderildi.
  • D.D. Erbahar, M. Harbeck, I. Gürol, G. Gümüş, E. Musluoglu, Z.Z.  Öztürk, V. Ahsen, Zinc phthalocyanines with fluorinated substituents for direct sensing of carbamate and organophosphate pesticides in water, Journal of Porphyrins and Phthalocyanines (2) , pp. 1-7, basım aşamasında.
  • D. D. Erbahar, I. Gürol, G. Gümüş, E. Musluoğlu, Z. Z. Öztürk, V. Ahsen, M. Harbeck, Pesticide sensing in water with phthalocyanine based QCM sensors, Sens. Actuators, B 173C (2012) 561–567.
  • Fabrication of gold patterns via multilayer transfer printing and electroless plating” Fevzihan Basarir, ACS Applied Materials and Interfaces, 4 (2012) 1324-1329
  • G.G. Avcı, C.Z.Koyuncu, "Morphologically controlled synthesis of flower shaped ZnO crystals with hexagonal rods and thick petals by hydrothermal method", Materials Letters, (2013) (baskıda)
  • G.G.Avcı,D.Abanoz, "Corrosion Protection of Steel Surfaces via Sol-Gel Coatings", Key Engineering Materials,V.264-268 (2004) 387-390.
  • S. Kırtay, E. Oktay, G.G. Avcı, V. Gunay, "Strengthening of SLS glasses by hybrid ormosil coating", Key Engineering Materials,V.264-268, (2004) 419-422.
  • J. Smid, G.G. Avcı, V. Gunay, R. Terpstra, J.P.G.M. Van Eijk, "Preparation and Characterization of Microporous Ceramic Hollow Fibre Membranes", J. of Membrane Science, 112 (1996) 85-90.
  • G.G. Avcı, Z. Mısırlı, V. Gunay, "Processing and Characterization of Micro-filtration Supports Prepared from Alumina Powders", Ceramics International, 22 (1996) 42-45.