Genel Yayınlarımız

-A +A

GENEL MAKALELER

  • G.M. Mamedov, M.Karabulut, H. Ertap, O. Kodolbaş, Ö. Öktü, A. Bacıoğlu, "Exciton Photoluminescence, Photoconductivity and Absorption in GaSe0.9Te0.1 Alloys Crystals", Journal of Luminescence 2009, 129, 226-230.
  • A.S. Kavasoglu, N. Kavasoglu, A.O. Kodolbas, O. Birgi, O. Oktu, S. Oktik, "Negative Capacitance Peculiarities in a-Si:H/c-Si Rectifier structure ", Microelectronic Engineering 2010, 87, 108-116.
  • A. Bacıoglu, A.O. Kodolbas, Ö. Öktü, “Temperature Dependent Photoluminescence of PECVD a-SiOx:H (x<2)”, Journal of Luminescence, 2010, 30, 1730-1737.
  • S. Kavasoğlu, Ö. Birgi, N. Kavasoğlu, G. Oylumoğlu, A.O. Kodolbaş, R. Kangı, O. Yılmaz, "Electrical Characterization of a-Si:H(n)/c-Si(p) Structure " Journal of Alloys and Compounds, 2011, 509, 9394-9398.
  • M.O. Reese, S.A. Gevorgyan, M. Jørgensen, E. Bundgaard, S. R. Kurtz, D. S. Ginley, D.C. Olson, M.T. Lloyd, P. Morvillo, E. A. Katz, A. Elschner, O. Haillant, T. R. Currier, V. Shrotriya, M. Hermenau, M. Riede, K. R. Kirov, G. Trimmej, T. Rath, O. Inganäs, F. Zhang, M. Andersson, K. Tvingstedt, M. Cantu, D. Laird, C. McGuiness, S. Gowrisanker, M. Pannone, M. Xiao, J. Hauch, R. Steim, D. M. DeLongchamp, R. Rösch, H. Hoppe, N. Espinosa, A. Urbina, G. Uzunoglu, J. Bonekamp, A. J.J.M. van Breemen, C. Girotto, E. Voroshazi and F.C. Krebs, "Consensus stability testing protocols for organic photovoltaic materials and devices", Solar Energy Materials and Solar Cells, 2011, 95, 1253.
  • D.M., Tanenbaum, M. Hermenau, E. Voroshazi, M.T. Llyou, Y. Galagan, B. Zimmermann, M. Hösel, H.F. Dam, M. Jorgensen, S.A. Gevorgyan, S. Kudret, W. Maes, L. Lutsen, D.Vandersande, U. Würfel, R. Andriessen, R. Rösch, H. Hoppe, G. Teran-Escobar, M. Lira-Cantu, A. Rivaton, G.Y. Uzunoğlu, D. Germack, B.Andreasen,  M.V. Madsen, K. Norrmany and F.C. Krebs, “The ISOS-3 inter-laboratory collaboration focused on the stability of a variety of organic photovoltaic devices”, RSC Advances, 2012, 2, 882-893.
  • R. Rösch, D.M. Tanenbaum, M. Jorgensen, M. Seeland, M. Baerenklau, M.Hermenau, E. Voroshazi, M.T. Lloyd, Y. Galagan, B. Zimmermann, U. Würfel, M.Hösel, H.F. Dam, S.A. Geworgyan, S. Kudret, W. Maes, L. Lutsen, D.Vanderzande, R. Andriessen, G. Teran-Escobar, M. Lira-Cantu, A. Rivaton, G.Y.Uzunoğlu, D. Germack, B. Andreasen, M.V. Madsen, K. Norman, H. Hoppe and F. Krebs, “Investigation of the degradation mechanisms of a variety of organic photovoltaic devices by combination of imaging techniques—the ISOS-3 inter-laboratory collaboration” Energy Environ. Sci., DOI:10.1039/c2ee03508a, 2012.
  • E. Tekin, “The blend ratio effect on the photovoltaic performance and stability of poly (3-hexylthiophene):[6,6]-phenyl-C61 butyric acid methyl ester (PCBM) and poly(3-octyl thiophene):PCBM solar cells”  Solar Energy Materials & Solar Cells 100 (2012) 174–184.
  • Nesrin Tore, Elif Alturk Parlak, Ozlem Usluer, DanielA.M.Egbe, SaitE.San, Pelin Aydogan,” Effect of blend ratio on poly(p-phenylene-ethynylene)-alt-poly (p-phenylene-vinylene) polymer solar cell”, Solar Energy Materials & Solar Cells,104 (2012), 39-44.
  • Monica Lira-Cantu, Gerardo Teran-Escobar, David M. Tanenbaum, Eszter Voroshazi, Martin Hermenau, Kion Norrman, Matthew T. Lloyd, Yulia Galagan, Birger Zimmermann, Markus Hösel, Henrik F. Dam, Mikkel Jørgensen, Suren Gevorgyan, Laurence Lutsen, Dirk Vanderzande, Uli Würfel, Ronn Andriessen, Roland Rösch Harald Hoppe, Agnès Rivaton, Gülşah Y. Uzunoğlu, David Germack, Birgitta Andreasen, Morten V. Madsen, Eva Bundgaard and Frederik C. Krebs On the stability of a variety of organic photovoltaic devices by IPCE and in-situ IPCE analyses - The ISOS-3 inter-laboratory collaboration. Physical Chemistry Chemical Physics, DOI:10.1039/C2CP40821J, 2012.
  • Aydogan P., Menda D., Parlak E.A., Ozdemir O., Kutlu K., "Excess Current/Capacitance Observation on Polymer-Fullerene Bulk Heterojunction, Studied Through I-V and C/G-V Measurements”, Solar Energ.Sol.Mat ., 103, 199-204 (2012).
  • Mucur, S.P., Tumay, T.A., San, S.E., Tekin, E., “Enhancing effects of nanoparticles on polymer_OLED performances”, J.Nanopart.Res. (2012) 14:1214.
  • Elif Alturk Parlak, Tülay Aslı Tumay, Nesrin Töre, Şerife Sarıoğlan, Pelin Kavak, Figen Türksoy, “Efficiency improvement of PCDTBT solar cells with silver nanoparticles” Solar Energy Materials & Solar Cells 110 (2013) 58–62.
  • Ö.Pehlivan, O.Yılmaz, A.O. Kodolbaş,M.Tomak, “Structural Characterization of intrinsic a-Si:H thin Film for Silicon Heterojunction solar Cell”, Journal of Optoelectronics and Advanced Materials, Vol.15, No.1-2, January-February 2013, p.22-24.
  • Josiah A. Bjorgaard and Muhammet E. Köse, “Amplified quenching of conjogated polymer nanoparticale photoluminescence for robust measurement of exciton diffusion length”, Journal of Applied Physics, 113, 203707 (2013).
  • Josiah A. Bjorgaard and Muhammet E. Köse, “Theoretical Study of Torsional Disorder in Poly(3-alkylthiophene) Single Chains: Intramolecular Charge-Transfer Character and Implication for Phoetvoltaic Properties”, J.of Phys.Chem.A 2013, 117, 3869-3876.
  • Baris Yilmaz, Josiah Bjorgaard, Christopher L. Colbert, Jay S. Siegel and Muhammet E. Köse, “Effective Solublilization of Single-Walled Carbon Nanotubes in THF Using PEGylated Corannulene Dispersant”, ACS Appl.Mater.Interfaces 2013, 5, 3500-3503.
  • Emine Tekin, “Influences on the white emission and stability of single layer electroluminescent devices”, Journal of Luminescence, 144 (2013), 69-73
  • Yongjun Li, Muhammet Erkan Kose and Kirk S. Schanze, Intramoleculare Triplet Energy Transfer in Anthracene-based Platinium Acetylide Oligomers, J.Phys.Chem., DOI:10.1021/jp4032173, 2013.
  • Ali Veysel Tunc, Andrea N. Giordano, Bernhard Ecker, Enrico Da Como, Benjamin J. Lear and Elizabeth von Haouff, “Silica Nanoparticles for Enhanced Carrier Transport in Polymer-Based Short Channel Transistors”, J.Phys. Chem. C 2013, 117, 22613-22618.
  • Serhat Odabas, Emine Tekin, Figen Turksoy and Cihangir Tanyeli, Inexpensive and valuable: a series of new luminogenic molecules with the tetraphenylethene core having excellent aggregation induced emission properties, Journal of Materials Chemistry C, 1 (2013) 7081-7091
  • Gulcin Haykir, Emine Tekin, Taner Atalar, Figen Türksoy, Highly efficient non-doped blue organic light emitting devices based on anthracene–pyridine derivatives, Thin Solid Films 548 (2013) 171-177
  • Alpay Kimyonok, Emine Tekin, Gülçin Haykır, Figen Turksoy, Synthesis, Photophysical and Electroluminescence Properties of Anthracene-Based Green-Emitting Conjugated Polymers, Journal of Luminescence 146 (2014) 186–192
  • Selin Pıravadılı Mucur, Daniel Lenkeit, Ioannis Kanelidis, Sait Eren San, Elisabeth Holder, Emine Tekin, Enhancing the device performance of a blue light-emitting copolymer using CdSe/ZnS quantum dots, Journal of Polymer Science Part B: Polymer Physics, 52(2014), 147–156,
  • Ipek Osken, Ali Senol Gundogan, Emine Tekin, Mehmet S Eroglu, and Turan Ozturk, Fluorene–Dithienothiophene-S,S-dioxide Copolymers. Fine-Tuning for OLED Applications, Macromolecules,  DOI: 10.1021/ma4016592.
  • “An efficient organic inverted solar cell with AnE-PVstataCBM active layer and V2O5/Al anode layer’’ N. Töre, A.Kosemen, E.A.Parlak, Zuhal Alpaslan, Christoph Ulbrich, Daniel Egbe, Yusuf Yerli, Sait Eren San, Solar Energy, 99 (2014) 88-94.
  • Round robin performance testing of organic photovoltaic devices, S. A. Gevorgyan, O. Zubillaga , J. Seoane , M. Machado, E.A Parlak, N. Tore , E. Voroshazi,, T. Aernouts, H. Müllejans, G. Bardizza, N. Taylor, W. Verhees, J. M. Kroon, P. Morvillo, C. Minarini, F. Roca, F. A. Castro, S. Cros, F. Trigo , Frederik C. Krebs, Renewable Energy 63, (2014) 376-387
  • Şenol Yıldız, Volkan Enç, Mustafa Kara, Yasemin Tabak, Emine Acet, Airbone Microbial Contamination Assesment of the Potential Risks in Solid Recovered Fuel Plants: A Case Study in Istanbul, Environmental Engineering and Management Journal (accepted paper)
  • Bakan HI, Celiss J.P.,Fretting Behaviour of 316L Stainless Steel Produced by Powder Injection Moulding ,Kovove Mater., 50 (2012) 33
  • Kayhan M., Hildebrandt E., Frotscher M., Senyshyn A., Hofmann K., Alff L., Albert B, Neutron diffraction and observation of superconductivity for tungsten borides, Solid State Sciences, 14, 11–12, 1656-1659, 2012.
  • Topal U, Bakan HI, Improvement Of The Magnetic Properties Of Highly Porous Open-Celled Magnets, J. European Ceramic Society, 31/ 783, 2011
  • Mustafa Kara, Esin Günay, Yasemin Tabak, Şenol Yıldız, Volkan Enç, Development of RDF for Cement Factories in Turkey, Combustion Science and Technology, 183: 203–219, 2011. temperatures, Materials Science and Engineering, A528 (2011) 8402-8409.
  • Mustafa Kara, Esin Günay, Yasemin Tabak, Şenol Yıldız, İstanbul’un Çöpleri Çimento Fırınlarında Ek Yakıta Dönüşüyor, Bilim ve Teknik Dergisi, Yıl: 42 Sayı: 499, Sayfa:68-71, Haziran 2009
  • Topal U., Ozkan H., Bakan HI, Cankur O, Topal K., Evolution of Magnetic and Structural Properties of TiO2 with Co – Doping, “J.  Non-Crytalline Solids”, 354,(2008), 1678-1682
  • Bakan HI, Injection Molding of Alumina with a Partially Water Soluble Binder System and Solvent Debinding Kinetics, Materials Science and Technology, 23-7/787, 2007
  • Bakan HI, A Novel Leaching and Sintering Process for Manufacturing Highly Porous Stainless Steel, Scripta Materiali, 55/ 203,206,  2006
  • Okutan M.,  Yakuphanoglu F., Bakan HI , and  F.Inanir, Space Charge Limited Conduction and Determination of Density of Localised States in Semiconductor Cobalt Doped TiO2, “Materials Science and Technology”,  21(11), (2006), 123-126.
  • Eroglu S. and Bakan HI, Solvent Debinding Kinetics And Sintered  Properties of Injection Molded 316L Stainless Steel Powder, “Powder Metallurgy”, 48, (2005), 4, 329-332.
  • Okutan M., Bakan HI, Korkmaz K.,Yakuphanoğlu F.,Variable Range Hopping Conduction and Microstructure Properties of Semiconducting Co-Doped TiO2  “PHYSICA –B”  Vol. 355, (2005), p.176-181.
  • Eroglu S. , Bakan HI, Thermodynamic Analysis of Mo2C Powder Synthesis by Chemical Vapor Reaction Method, “Key Engineering Materials”. 264-268,( 2004), 121-124
  • Bakan HI, Gunes M, Development of Water Soluble Binder Systems for Low Pressure Injection Molding of Alumina, “Key Engineering Materials”. 264-268, (2004),  313-316.
  • Mindivan H., Bakan HI, Cimenoglu H, Kayalı ES, Wear Behaviour of SiC, Cr3C2 and WC Doped Alumina, “Key Engineering Materials”. 264-268, (2004),  469-472.
  • Boyraz T, Kılıç, A, Ertuğ B, Tavsanoğlu T, Karakas Y, Addemir O., The Characterization of Metal-Ceramic Interfaces in Porcelain Teeth, Key Engineering Materials, Vol. 264-268, pp. 683-686, 2004
  • Bakan HI, and Kayalı ES, Effect of Oxygen Content and Stearate Additives on Sintering Characteristics of Cu-25Cr Composite, “Powder Metallurgy” , (2003),46, No:3, p:259-264.
  • Bakan HI, Heaney D, German R.M, The Effect of Nickel Boride and Boron Additions on the Sintering Characteristics of Injection Molded 316L Powder Using Water Soluble Binder System, Powder Metallurgy, 44-3/ 235, 2001
  • Bakan HI, Jumadi Y, Messer P.F, Davies H, Ellis B, Study of Processing Parameters for MIM Feedstock Based on Composite PEG-PMMA Binder, “Powder Metallurgy”, (1998), Vol.41,No:4, p:119- 121.
  • Y. Birol, Evolution of grain structure across joints in friction stir welded EN AW 5083 H111 plates during thermal exposure, Materials Science and Technology, DOI: 10.1179/1743284713Y.0000000272.
  • Y. Birol, S. Kasman, Effect of welding parameters on microstructure and mechanical properties of friction stir welded EN AW 5083 H111 plates, Materials Science and Technology, DOI: 10.1179/1743284713Y.0000000280.
  • Y. Birol, S. Kasman, Effect of welding parameters on the microstructure and strength of friction stir weld joints in twin roll cast EN AW Al-Mn1Cu plates Journal of Engineering Materials and Performance, DOI: 10.1007/s11665-013-0607-y.
  • Y. Birol, Low temperature synthesis of MgB2 via powder metallurgy processing, Journal of Thermal Analysis and Calorimetry, DOI: 10.1007/s10973-013-3258-1.
  • Y. Birol, Efficiency of binary and ternary alloys from the Al-Ti-B system in grain refining aluminium foundry alloys, International Journal of Cast Metals Research, DOI 10.1179/1743133613Y.0000000064.
  • Y. Birol, Design of potent grain refiners for wrought aluminium alloys, International Journal of Cast Metals Research, DOI 10.1179/1743133613Y.0000000060.
  • Y. Birol, F. Birol, B. Yüksel, Ö. Duygulu, “Corrosion behaviour of twin-belt cast EN AW 7075 alloy”, Mater. Corr. DOI: 10.1002/maco.201206521.
  • Y. Birol, Response to thermal exposure of ball milled Cu-Mg/B2O3 powder blends, Metallurgical and Materials Transactions B, 44 (2013) 969-973.
  • Y. Birol, “Impact of grain size on mechanical properties of AlSi7Mg0.3 alloy”, Materials Science and Engineering, 559 (2013) 394-400.
  • Y. Birol, “Optimization of homogenization for EN AW 6060 extrusion alloy” Materials Characterization, 80 (2013) 69-75.
  • Y. Birol, “Response to thermal exposure of ball milled aluminium-borax powder blends”, Materials and Metallurgical Transactions B, 44B (2013) 359-364.
  • Y. Birol, “Formation of pinch marks on pack rolled aluminium foil”, Engineering Failure Analysis, 28 (2013) 82-89.
  • Y.Birol, “evolution of globular microstructures during processing of aluminium slurries”, Transactions of Nonferrous Metals Society of China, 23 (2013) 1-6.
  • Y. Birol, “sliding wear of CrN, AlCrN and AlTiN coated AISI H13 hot work tool steels in aluminium extrusion”, Tribology Int. 57 (2013) 101-106.
  • Y. Birol, “Homogenization of EN AW 6005A for improved extrudability”, Materials and Metallurgical Transactions A, 44 (2013) 504-511.
  • Y. Birol, “Effect of cooling rate on precipitation during homogenization cooling in an excess silicon AlMgSi alloy”, Materials Characterization, 73 (2012) 37-42.
  • Y.Birol, “Aluminothermic reduction of B2O3 for the manufacture of of Al-B alloys”, Materials Chemistry and Physiscs, 136 (2012) 963-966.
  • Y. Birol, “Performance of Al-5Ti-1B and Al-3B grain refiners in investment casting of AlSi7Mg0.3 alloy with preheated ceramic moulds”, International Journal of Cast Metals Research, 25, 5 (2012) 296-300.
  • Y.Birol, B. Yüksel, “Performances of gas nitrided and AlTiN coated AISI H13 hot work tool steel in aluminium extrusion”, Surface and Coatings Technology, 207 (2012) 461-466.
  • Y. Birol, “Effect of solute Si and Cu on grain size of aluminium alloys”, International Journal of Cast Metals Research, 26, 1 (2013) 22-27.
  • Y. Birol, “Effect of solute Mg on grain size of aluminium alloys”, Materials Science and Technology, 28, 8 (2012) 924-927.
  • P. Erdoğan, Y. Birol, “Effect of processing parameters on structural features of anodic aluminium oxides”, Applied Physics A, 108 (2012) 587-592.
  • Y. Birol, “Heat treatment of thixoformed EN AW 7075 alloy”, Materials Science and Technology, 28 (2012) 651-657.
  • Y. Birol, “Potential of cast EN AW 7075 billet as thixoforging feedstock”, Materials Science and Technology, 28, 5 (2012) 553-559.
  • Y. Birol, AlB3 master alloy to grain refine AlSi10Mg and AlSi12Cu aluminium foundry alloys, Journal of Alloys and Compounds, 513 (2012) 150-153.
  • Y. Birol, Grain refinement of Al-Cu foundry alloys with B additions, International Journal of Cast Metals Research, 25 (2012) 117-120.
  • Y. Birol, Heat Treatment of twin belt cast EN AW 7075 alloy, Materials Characterization, 63 (2012) 1-8.
  • Y. Birol, Analysis of wear of a gas nitrided H13 tool steel die in aluminium extrusion, Engineering Failure Analysis, 26 (2012) 203-210.
  • Y. Birol, Isothermal oxidation of plasma nitrided hot work tool steel at 750 C, Materials at High Temperatures, 29 (2012) 17-22.
  • P. Erdoğan, B. Yüksel, Y. Birol, Effect of chemical etching on the morphology of anodic aluminium oxides in the two-step anodization process, Applied Surface Science, 258 (2012) 4544-4550.
  • Y. Birol, “Impact of interannealing on recrystallization during final annealing of twin belt cast AlFeSi sheet”, International Journal of Materials Research, 103 (2012) 992-997.
  • Y. Birol, Age hardening of EN AW 2014 alloy extruded in the semi solid state, Materials Chemistry and Physiscs, 131 (2012) 694-697.
  • Y. Birol, Interaction of grain refinement with B and modification with Sr in aluminium foundry alloys, Materials Science and Technology, 28 (2012) 70-76.
  • Y. Birol, Response to T6 treatment of extruded and thixoformed EN AW 2014 alloys, Materials Science and Engineering, A528 (2011) 5636-5641.
  • Y. Birol, Response to thermal cycling of duplex-coated hot work tool steels at elevated temperatures, Materials Science and Engineering, A528 (2011) 8402-8409.
  • Y. Birol, Performance of AlTi5B1, AlTi3B3 and AlB3 master alloys in refining the grain structure of aluminium foundry alloys, Materials Science and Technology 28 (2012) 481-486.
  • Y. Birol, D. Isler ve M. Urgen, High temperature sliding wear testing of AlTiN and AlTiON-coated tool steels, Metallurgical and Materials Transactions 42 (2011) 3316-3322.
  • Y. Birol ve A. Kayihan, Thermal fatigue testing of plasma transfer arc Stellite coatings on hot work tool steels under steel thixoforming conditions, Metallurgical and Materials Transactions 42 (2011) 3277-3283.
  • Y. Birol, Effect of Si in grain refinement of hypoeutectic Al-Si alloy with Ti and B additions, Materials Science and Technology 28 (2012) 385-389.
  • Y. Birol, Grain refinement of pure aluminium and Al-7Si alloy with an Al-3B master alloy, Materials Science and Technology 28 (2012) 363-367.
  • Y. Birol, E.A. Guven and L. Capan, Extrusion of EN AW-2014 alloy in the semi-solid state, Materials Science and Technology 27 (2011) 1851-1857.
  • Y. Birol, Isothermal and cyclic oxidation of plasma-nitrided hot work tool steels at elevated temperatures, Oxidation of Metals 76, 5-6 (2011) 399-417.
  • Y. Birol, Thixoforming of EN AW-2014 alloy at high solid fraction, Journal of Materials Processing Technology 211 (2011) 1749-1756.
  • Y. Birol, An improved halide salt process to produce Al-B master alloys, Materials Science and Technology 27 (2011) 1846-1850.
  • Y. Birol, Thermal cycling of yttria stabilized zirconia coated hot work tool steel, Journal of Thermal Spray Technology 20 (2011) 1110-1117.
  • Y. Birol and D. Isler, Abrasive wear performance of AlCrN-coated hot work tool steel at elevated temperatures under three-body regime, Wear 270 (2011) 281-286.
  • Y. Birol, Effect of post-oxidation treatment on thermal fatigue behaviour of plasma nitrided hot work tool steel at elevated temperatures, Surface & Coatings Technology 205 (2011) 2763-2769.
  • Y. Birol, A novel C-free Co-based alloy for high temperature applications, Materials Science & Engineering A528 (2011) 1117-1124.
  • Y. Birol, Metallographic investigation of a hot tear in an Al-Zn-Mg billet, International Journal of Cast Metals Research 24 (2011) 1-5.
  • Y. Birol and D. Isler, Thermal cycling of AlTiN and AlTiON-coated hot work tool steels at elevated temperatures, Materials Science & Engineering A528 (2011) 4703-4709.
  • Açıkalın E., Atıcı O., Sayıntı A., Çoban K., Erkalfa H., (2013). Preparation of Dendritic Waterborne Poly(urethane-urea)/ Ni-Zn  Ferrite Composites and their Microwave Absorption Properties, Progress in Organic Coatings, 76, 972–  978.
  • Vertiy A., Sayinti A., Açikalin E., Çoban K. (2013). Complex Dielectric Coefficient of Breast Phantom Prepared For Breast Cancer Detection, Physica Polonica Acta A,2,123
  • Açıkalın E., Atıcı O. (2012) Preparation of Linear Waterborne Polyurethane Nanocomposites and Effect of Clay on UV Degradation, Polyurethane Magazine International, Issue 5, pp. 324-328.
  • Sezer E., Kızılcan N., Çoban K.,“Application of Ketone-Based Resins as Anticorrosive  Coating “International Journal of Electrochemistry, Volume 2011, Article ID 253404, 9 pages   doi:10.4061/2011/253404.
  • Öncül A., Çoban K.,Sezer E., Şenkal B. F.,” Inhibition of the corrosion of  Stainless steel by poly-N-vinylimidazole and N-vinylimidazole.” Progress in Organic Coatings” 71(2011), 167-172.
  • Sezer E., Ustamehmetoğlu B., Bayır Z.A., Çoban K., and Kalkan A.,  “Corrosion Inhibition Effect of 4-(2-Diethylamino-Ethylsulfonyl)-Phthalonitrile and 4, 5-Bis(Hexylsulfonyl)-Phthalonitrile”, International Journal of Electrochemistry Volume 2011,  Article ID 235360, 5 pages, doi:10.4061/2011/235360.
  • Sezer E., Kızılcan N., Çoban K.,“Application of Ketone-Based Resins as Anticorrosive  Coating “International Journal of Electrochemistry, Volume 2011, Article ID 253404, 9 pages   doi:10.4061/2011/253404.
  • Cengiz H., Aydoğan B., Ateş Ş., Açıkalın E., Yağcı Y. (2011). Intramolecular Crosslinking of Polymers by Using Difunctional Acetylenes via Click Chemistry, Designed Monomers and Polymers, 14, 69-78.
  • Yüksel B., Kırtay S., Özkan T.O., Açıkalın E., Erkalfa H. (2008). The Effect of B2O3 Addition to the Microstructure and Magnetic Properties of Ni0.4Zn0.6Fe2O4 Ferrite, Journal of Magnetism and Magnetic Materials, 320, 714-718.
  • M. F. Huseyinoglu, S. R. Allakhverdiev, Z. Salaeva, A. Secgin, K. R. Allakhverdiev, "The possibility of using remote sensing technology of lidars for monitoring ecosystem health by detecting habitat condition", Proc. of SPIE Vol. 8677 (2013) doi: 10.1117/12.2014217.
  • M. F. Huseyinoglu,  Z. Salaeva, A. Secgin, K. R. Allakhverdiev, "Preliminary Results from the New Multiwavelength Aerosol Lidar Scanning System", Proc. of SPIE Vol. 8677 (2013) doi: 10.1117/12.2014958.
  • Veselovskii, O. Dubovik, A. Kalgotin, M. Korenskiy, D. N. Whiteman, K. R. Allakhverdiev, M. F. Huseyinoglu, "Linear estimation of particle bulk parameters from multi-wavelength lidar measurements", Atmos. Meas. Tech., 5 (2012), 1135-1145.
  • Papayannis, R. E. Mamouri, P. Kokkalis, V. Amiridis, N. I. Kristiansen, A. Stohl, D. Balis, E. Giannakaki, D. Nicolae, G. Tsaknakis, L. Belegante, A. Nemuc, I. Veselovskii, M. Korenskiy, K. R. Allakhverdiev, M. F. Huseyinoglu, T. Baykara, "Optical properties and vertical extension of aged ash layers over the Eastern Mediterranean as observed by Raman lidars during the Eyjafjallajökull eruption in May 2010", Atmos. Env., 48 (2012), 56-65.
  • K. R. Allakhverdiev, T. K. Baykara, M. Bekbolet, M. F. Huseyinoglu, S. Ozbek, Z. Salaeva, A. Secgin, S. Vartapetov, I. Veselovskii, M. Korenskiy, "Preliminary Results from the New Multiwavelength Aerosol LIDAR in Turkey", Fizika, 16 (2009), 22-25.
  • K. R. Allakhverdiev, T. K. Baykara, A. Secgin, S. Ozbek, A. M. Ulubey, Z. Salaeva, M. F. Huseyinoglu, S. L. Druzhinin, K. A. Konovalov, V. Y. Shchagin, O.N. Smirnov, S. Yu. Strakhov, E. V. Perkina, "Compact Raman (CLS) Spectrometer for Active Test of Liquids and Solid Samples", Fizika, 16 (2009), 46-50.
  • Fabrication of gold patterns via multilayer transfer printing and electroless plating” Fevzihan Basarir, ACS Applied Materials and Interfaces, 4 (2012) 1324-1329
  • G.G. Avcı, C.Z. Koyuncu, "Morphologically controlled synthesis of flower shaped ZnO crystals with hexagonal rods and thick petals by hydrothermal method", Materials Letters, (2013) (baskıda)
  • G.G.Avcı, D.Abanoz, "Corrosion Protection of Steel Surfaces via Sol-Gel Coatings", Key Engineering Materials,V.264-268 (2004) 387-390.
  • S. Kırtay, E. Oktay, G.G. Avcı, V. Gunay, "Strengthening of SLS glasses by hybrid ormosil coating", Key Engineering Materials,V.264-268, (2004) 419-422.
  • J. Smid, G.G. Avcı, V. Gunay, R. Terpstra, J.P.G.M. Van Eijk, "Preparation and Characterization of Microporous Ceramic Hollow Fibre Membranes", J. of Membrane Science, 112 (1996) 85-90.
  • G.G. Avcı, Z. Mısırlı, V. Gunay, "Processing and Characterization of Micro-filtration Supports Prepared from Alumina Powders", Ceramics International, 22 (1996) 42-45.
  • A. Vatansever, T. Y. Inan, H. Dogan, A. Sirkecioğlu, “Synthesis of Poly(Butyl Acrylate-Co-Methyl Methacrylate)/Montmorillonite Waterborne Nanocomposite via Semi-Batch Emulsion Polymerization”, Journal of Applied Polymer Science, Volume 132, Issue 32, August 20, 2015.
  • H. J. Köroğlu, B. Demir, H. Öz, S. Temel, M. Ateş, A. Sağlık “Ilık Karışım Asfalt Katkıları Üretim Teknolojilerinin Geliştirilmesi,;  Yol Dergisi, 32, 6, Ocak-Şubat 2015, 46-78.
  • G. Yaşa Atmaca, C. Dizman, T. Eren, A. Erdoğmuş, Novel axially carborane-cage substituted silicon phthalocyanine photosensitizer; synthesis, characterization and photophysicochemical properties, Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy, Volume 137, 244-249, 2015.
  • S. Gürbüz, B. Özmen Monkul, T. İpeksaç, M. Gürtekin Seden, M. Erol, “Optimization of the particle size distribution of magnetic latent fingerprint powders for porous surface applications”, Journal of Forensic Sciences, 2015, 60(3), 727-736.
  • T. Y. Inan, E. Yıldız, B. Karaca, H. Dogan, A. Vatansever,  M. Nalbant, K. Eken, UV curable lens production using molecular weight controlled PEEK based acrylic oligomer (Ac-PEEK), Journal of Materials Science: Materials in Medicine, 25(8), (2014), 2027-39.
  • M. Gürtekin Seden, E. Baştürk, T. Y. Inan, N. Kayaman Apohan, A. Güngör, “Synthesis and fuel cell characterization of blend membranes from phenyl phosphine oxide containing flourinated novel polymers”  Journal of Power Sources, 271, (2014),  465–479.
  • İ. Y. Elbeyli, A. Turan, İ. E. Kalafatoğlu, Electrochemical Production of Boric Acid, Journal of Chemical Technology and Biotechnology, In Press, 2014.
  • V. Pelitli, Ö. Doğan, H. J. Köroğlu,  “Characterization of Waste Oils in Air-Breathing Jet Turbine Engine” , Journal of Engineering and Natural Scince, Sigma 32, 82-95, (2014).
  • E. Özduğan, B. Andak, N. Bulutçu, S. Türdü, M. Tatlıer, "Ternary phase diagrams of CdSO4–NiSO4–H2O at 40 °C and 80 °C", Fluid Phase Equilibria, 381 (2014), 67-70.
  • Ş. Sarıoğlan, S. Gürbüz, T. İpeksaç, M. Gürtekin and M. Erol, "Pararosaniline and crystal violet tagged montmorillonite for latent fingerprint investigation", Applied Clay Science, 2014, 87, 235-244.
  • A. Kimyonok, E. Tekin, G. Haykır, F. Türksoy, “Synthesis, photophysical and Electroluminescence properties of Anthracene-based green-emitting conjugated polymers” Journal of Luminescence, 2014, 146, 186-192.
  • G. Haykır, E. Tekin, T. Atalar and F. Türksoy, “Highly efficient non-doped blue organic light emitting devise based on anthracene-pyridine derivatives” , Thin Solid Films, 2013,  548, 171-177.
  • J. Chiang,  A. Kimyonok, M. K. Etherington, G. C. Griffiths, V. Jankus, F. Turksoy and A. P. Monkman, “Ultrahigh efficiency fluorescent single and bi-layer Organic Light Emitting Diodes: The Key Role of  Triplet Fusion” , Advanced Functional Materials, 2013, 23, 739-746.
  • C. Dizman, M. Kahveci, and Y. Yagci., Synthesis of polysulfone-b-polystyrene block copolymers by mechanistic transformation from condensation polymerization to free radical polymerization, Polymer Bulletin. Volume 70, Issue 7, Pages 2097-2109, 2013.
  • C. Dizman, M. A. Tasdelen, Y. Yagci, (2013). Recent advances in the preparation of functionalized polysulfones, Polym. Int., 62: 991–1007, 2013.
  • C. Dizman, T. Uyar, M. A. Tasdelen, Y. Yagci., Synthesis and Characterization of Polysulfone/POSS Hybrid Networks by Photoinduced Crosslinking Polymerization, Macromol. Mater. Eng., 298: 1117–1123, 2013.
  • E. Alturk Parlak, T. A. Tumay,  N. Tore, Ş. Sarıoğlan, P.Kavak, F. Türksoy “Efficiency Improvement of PCDTBT solar cells with Silver Nanoparticles”, Solar Energy Materials  and Solar Cells, 110, 58–62, (2013).
  • E. Baştürk, T. Y. İnan, A. Güngör , “Flame  retardant  UV-curable  acrylated  epoxidized  soybean  oil  based organic–inorganic  hybrid  coating”, Progress  in  Organic  Coatings  76, 985–  992, (2013).
  • H. Doğan, E. Yıldız, M. Kaya, T. İnan, “Sulfonated Carbon Black Based Composite Membranes for Fuel Cell Applications”. Bulletin of Material Science, Vol:36, 4, 563-573  (2013).
  • S. Odabaş, E. Tekin, F. Türksoy and C. Tanyeli, “Inexpensive and valuable: A series of new luminogenic molecules with tetraphenylethene core having excellent aggregation induced emission properties” , Journal of Material Chemistry C, 2013,1, 7081-7091.
  • S. Patir, E. Ertürk “Concise Total Syntheses of (±)-Noruleine and (±)-Uleine”, Organic and Biomolecular Chemistry 11, 2804, (2013).
  • Ş. Sarıoğlan “Recovery of Palladium from Spent Activated Carbon Supported-Palladium Catalyst”, Platinum Metals Review, 57, (4), 289–296 (2013).
  • T. İnan, H. Doğan, A. Güngör “PVdF-HFP Membranes for Fuel Cell Applications: Effects of Doping Agents and Coating on the Membrane's Properties” Ionics, DOI: 10.1007/211581-012-0803- (2013).
  • T. İnan, B. Karaca, H. Doğan “Synthesis and Characterizations of Polybenzoxazines from Renewable Source of Coal Based Products via Microwave and Conventional Heat Treatments” Journal of Applied Polymer Science, DOI: 10.1002/APP.38395, (2013).
  • A. Z. Turan, İ. Y. Elbeyli, İ. E. Kalafatoğlu, “Membrane Electrolysis of Borax Pentahydrate (Na2B4O7.5H2O)”, J. Electrochem. Soc., 2012, 159 (9): E149-E153.
  • E. Ertürk, M. A. Tezeren, T. Atalar, T. Tilki “Regioselective Ring-Opening of Epoxides with ortho-Lithioanisoles Catalyzed by BF3.OEt2”, Tetrahedron 68, 6463, (2012).
  • E. Ertürk, M. A. Tezeren, T. Tilki, T. Erdogan. A. C. Gören “Polymerization of  Epoxides Catalyzed by a Mixed-Valent Iron Trifluoroacetate [Fe3O(O2CCF3)6(H2O)3]”, Polymer International 61, 795, (2012).
  • F. Uğur Nigiz, H. Doğan, N. Durmaz Hilmioğlu, “Pervaporation of ethanol/water mixtures using clinoptilolite and 4A filled sodium alginate membranes”, Desalination, 300, 24-31, (2012).
  • H. Doğan, “Preparation and characterization of calcium alginate based composite adsorbents for the removal of Cd, Hg and Pb ions from aqueous solution”, Toxicological & Environmental Chemistry, 94, 3, 482-499,  (2012).
  • J. Köroğlu, E. Erpek, H. Gökgün, “Türkiye’de Atık Madeni Yağ İzleme Sistemi”, Kimyasal Forum Kimya Sanayi Dergisi, sayfa 6-14, (2012).
  • H. J. Köroğlu, P. H. Öz,  A. N. Bulutçu, “Influence of Polyelectrolytes on Crystallization of Zeolite Y”, Journal of Crystal Growth, 355, pp. 8-12, (2012).
  • Ş. Sarıoğlan, “A comparison study on conductive poly(3,4-ethylenedioxythiophene) nanocomposites synthesized with clay type montmorillonite and organophilic montmorillonite”, Particulate Science and Technology, 30: 68–80, (2012).
  • A.Z. Turan, İ.Y. Elbeyli, T. Bahar, İ.E. Kalafatoğlu, “The Performance of Nafion®424 in the Membrane Electrolysis of Borax Solution”, Journal of Industrial and Engineering Chemistry,18 (3), 1102-1106, (2012).
  • C. Dizman, D. O. Demirkol, S. Ates, L. Torun, S. Sakarya, S. Timur, Y. Yagci, Photochemically Prepared Polysulfone/Poly (ethylene glycol) Amphiphilic Networks and Their Biomolecule Adsorption Properties  Colloids and Surfaces B: Biointerfaces, Volume 88, Issue 1, 265-270, 2011.
  • C. Dizman, S. Ates, L. Torun, Y. Yagci. Synthesis, characterization and photoinduced curing of polysulfones with (meth)acrylate functionalities. Beilstein J. Org. Chem. 6, No. 56, 2010.
  • C. Dizman, S. Ates, T. Uyar, M. A. Tasdelen, L. Torun, Y. Yagci, Polysulfone/Clay Nanocomposites by in situ Photoinduced Crosslinking Polymerization, Macromolecular Materials and Engineering, 1439-2054, 2011.
  • H. Doğan, T. Inan, M. Koral, M. Kaya, “Organically modified montmorillonite based SPEEK composite membranes for fuel cell applications”, Applied Clay Sci., 52, 285-294, (2011).
  • M. Sangermano, I. Roppolo, V. H. A. Camara, C. Dizman, S. Ates, L. Torun, Y. Yagci, "Polysulfone/Metal Nanocomposites by Simultaneous Photoinduced Crosslinking and Redox Reaction« Macromolecular Materials and Engineering, 296, 2011.
  • S. Patir, E. Ertürk “An Entry to the Azocino[4,3-b]indole Framework through a Dehydrogenative Activation of 1,2,3,4-Tetrahydrocarbazoles Mediated by DDQ: Formal Synthesis of (±)-Uleine”, The Journal of Organic Chemistry 76, 335, (2011).
  • S. Ates, C. Dizman, B. Aydogan, B. Kiskan, L. Torun, Y. Yagci. Synthesis, characterization and thermally activated curing of polysulfones with benzoxazine end groups, Polymer, Volume 52, Issue 7, 23 March 2011, Pages 1504-1509.
  • E. Unveren, T. Erdogan, S.S. Celebi, T.Y. Inan, "Role of post-sulfonation of poly(ether ether sulfone) in proton conductivity and chemical stability of its proton exchange membranes for fuel cell", International Journal of Hydrogen Energy, 35, 3736–3744, 2010.
  • E. Ertürk, M. Göllü, A.S. Demir “Efficient Rearrangement of Epoxides Catalyzed by a Mixed-Valent Iron Trifluoroacetate [Fe3O(O2CCF3)6(H2O)3]”, Tetrahedron 66, 2373, (2010).
  • H. Doğan, N. Durmaz Hilmioğlu, “Zeolite-filled regenerated cellulose membranes for pervaporative dehydration of glycerol”, Vacuum , 84, 1123-1132 (2010).
  • H. Doğan, N. Durmaz Hilmioğlu, Chitosan coated zeolite filled regenerated cellulose membrane for dehydration of ethylene glycol/water mixtures by pervaporation, Desalination, 258, 120-127, (2010).
  • H.J. Köroğlu, “TÜBİTAK Marmara Araştırma Merkezi (MAM) Kimya Enstitüsü Atık Madeni Yağların Kontrol ve İzleme Sisteminin Oluşturulması Projesi”, Kimyasal Forum Kimya Sanayi Dergisi, Yıl: 9, Sayı: 27, sayfa: 5-9, (2010).
  • M. Çelik Karakaya, N. Karakaya, Ş. Sarıoğlan, M. Koral, “Some properties of thermal muds of some spas in Turkey”, Applied Clay Science, 48, 531-537 (2010).
  • S. İnan, F.A. Uğur, T.Y. İnan, M.N. Yalçın, U. Mann  “Relationship Between Organic Matter, Sulphur and Phosphate in the Upper Cretaceous Marine Carbonates (Karaboğaz Formation, SE Turkey): Implications for early oil generation”, Journal of Petroleum Geology,, vol.33, issue 4, pg 319-337, 2010.
  • Ş. Sarıoğlan, H. Yuzer, M. Koral, “Acid Activation and Bleaching Performance of Turkish (Somas) Bentonite in the Crude Soybean Oil” Particulate Science and Technology, 28: 4, 298 — 308, (2010).
  • E. Tanrıverdi, A. Kılıç, S. Harbeck, G. Yenilmez Çiftçi, 'The reaction of N3P3Cl4[NH(CH2)3NMe] with difunctional fluoro alkohols', Heterocycles, 78(9), 2277-2286, (2009).
  • H. Doğan, N. Durmaz Hilmioğlu, “Dissolution of cellulose with NMMO by microwave heating”, Carbohydrate Polymers 75, 90-94, (2009).
  • H. Doğan, M. Koral, T. İnan, Ag/Zn zeolite containing antibacterial coating for food packaging substrates, Journal of Plastic Film and Sheeting, V. 25, 207-220, (2009).
  • M. Gurtekin, N. Kayaman Apohan, Y. Menceloglu, A. Gungor, UV curable sulfonated hybrid materials and their performance as proton exchange membranes. Reactive and Functional Polymers. Sayı 9. Cilt 69 sf 698, 2009.
  • O. Ozarslan, E. Yıldız, T. Y. İnan, A. Kuyulu, A. Güngör, “Novel Amine Terminated Elastomeric Oligomers and Their Effects on Properties of Epoxy Resins as a Toughener” J. Appl. Polym. Sci. Vol. 115, 37–45 (2009).
  • T. Erdogan, E. E. Unveren, T. Y. Inan, B. Birkan, "Well-defined block copolymer ionomers and their blend membranes for proton exchange membrane fuel cell", Journal of Membrane Science, 344, 172–181, 2009.
  • E. Yildiz, O. Ozarslan, T. Y. Inan, A. Kuyulu, A. Gungor, Toughening of epoxy resins by amine terminated poly(arylene ether ketone)s having pendant tertiary butyl groups. Polymer Bulletin (Heidelberg, Germany), 58(3), 503-511 (2007).
  • E. Yildiz, O. Ozarslan, T.Y. Inan, H. Yildirim, A. Kuyulu, A. Gungor. Thermal and Mechanical Properties of Poly(arylene ether ketone)s having Pendant Tertiary Butyl Groups. Journal of Polymer Research, 14(1), 61-66, 2007.
  • T. Bahar, A. Tuncel, Concanavaline A Attached Poly(p-Chloromethystyrene) beads for Glycoenzyne Separation, Journal of Applied Polymer Science, Vol 92, 2116-2124, 2004.
  • T. Bahar, A. Tuncel, Characterization of Yeast Invertase Purified By Concanavaline A Immobilized Poly(p-chloromethylstyrene) Beads, Reactive and Functional Polymers, 61, 203-210, 2004.
  • H.J. Köroğlu, S. Kocakuşak, K. Akçay, R. Tolun, 2003. Akışkan Yatakta Sodyum Perborat Monohidrat Üretimi, Journal of Institute of Science and Technology of Balıkesir University, Cilt 5, Sayı 1, 2003, 91-98.
  • T. Yılmaz İnan, E. Ekinci, A. Kuyulu, A. Güngör, "Preparation of Novel UV-Curable Urethane Methacrylated Urethane Resins from a Modified Epoxy Resin and Isocyanatoethylmethacrylate (IEM)", Polymer Bulletin 47, 437-444 (2002).
  • T. Bahar, A. Tuncel, Immobilization of invertase onto crosslinked-poly(p-chloromethylstyrene) beads, Journal of Applied Polymer Science, 83 (6), 1268-1279, 2002.
  • A. Tuncel, M. Tuncel, B. Ergun, C. Alagöz, T. Bahar, Carboxyl Carrying-large uniform latex particles, Colloid Surface A, 197 (1-3): 79-94, 2002.
  • H. J. Köroğlu, A. Sarıoğlan, M. Tatlıer, A.E. Şenatalar, Ö.T. Savaşçı, Effects of Low-Temperature Gel Aging on the Synthesis of Zeolite Y at Different Alkalinities, Journal of Crystal Growth, 241, 2002, pp.481-488.
  • H. J. Köroğlu, A. Sarıoğlan, M. Tatlıer, A.E. Şenatalar, Ö.T. Savaşçı, 2002. Effects of Low-Temperature Gel Aging on the Synthesis of Zeolite Y at Different Alkalinities, Journal of Crystal Growth, 241, 2002, pp.481-488.
  • H. J. Köroğlu, H. Yüzer, A.N. Bulutçu, 2002. Influence of Polyelectrolytes on Crystallization of Zeolite Y, CHISA'02, 15 th International Congress of Chemical and Process Engineering, Praha, Czech Republic, 25-29 August 2002.
  • E. Yıldız, T. Yılmaz İnan, H. Yıldırım, A. Kuyulu, A. Güngör " Thermal and Mechanical Properties of Poly (arylene ether ketone)s based on 5-ter-butyl-1,3 bis (4-fluorobenzoyl)benzene", Macromolecular Chemistry and Physics No: 10, 286, (2001).
  • T. Yılmaz İnan, E. Ekinci, E. Yıldız, A. Kuyulu, A. Güngör, "Preparation and Characterization of Novel UV-Curable Urethane Methacrylate Difunctional Monomers and Their Structure-Property Relationships,1" Macromolecular Chemistry and Physics, 202, 4, 532-540, (2001).
  • T. Yılmaz İnan, E. Ekinci, E. Yldız, A. Kuyulu, A. Güngör," Preparation and Characterization of Novel UV-Curable Ester Methacrylate Crosslinking-Agents and Their Structure- property relationships,2" Macromolecular Chemistry and Physics, 202, 4, 541-545 (2001).
  • H.J. Köroğlu, S. Kocakuşak, K. Akçay, H. Yüzer, Ö. T. Savaşçı, Y. Bilge, R. Tolun, Preparation of Inorganically Modified Bentonites Suitable for Thickening and as Thixotropic Agents, XXI International Mineral Processing Congress, Rome, Italy, A5, pp.45-49, 23-27 July 2000.
  • E. Yıldız, Ö. Özarslan, T. Yılmaz, H. Güçlü, A. Kuyulu, A. Güngör, "Perfectly alternating poly(arylene ether ketone sulfone)'s, Polymer Bulletin, 44,143 -150 (2000).
  • T. Bahar, S.S. Celebi, Performance of immobilized glucoamylase in a magnetically stabilized fluidized bed reactor (MSFBR), Enzyme Microb. Technol., 26, 28-33, 2000.
  • T. Bahar, A. Tuncel, Immobilization of a-chymotrypsin onto newly produced poly(hydroxypropyl methacrylate-co-methacrylic acid) hydrogel beads, Reactive and Functional Polymers, 44, 71-78, 2000.
  • Unsal, E., Bahar, T., Tuncel, M., Tuncel, A., DNA adsorption onto polyethylenimine-attached poly(p-chloromethylstyrene) beads, Journal of Chromatography A 898 (2) 167-177, 2000.
  • H. Yüzer, H. Doğan, H. J. Köroğlu, S. Kocakuşak, Analysis of Sulfide Layer on Gallium Arsenide Using X-Ray Photoelectron Spectroscopy, Spectrochimica Acta Part B, 2000, pp. 991-996.
  • S. Kocakuşak, H. J. Köroğlu, Ö.T. Savaşçı, R. Tolun, Production of Sodium Perborate Monohydrate by Microwave Heating,   Industrial & Engineering Chemistry Research, Vol 37, No:6, 1998, pp. 2426-2429.
  • S. Kocakuşak, H. J. Köroğlu, R. Tolun, Drying Wet  Boric Acid by Microwave Heating, Chemical Engineering & Processing,  Vol 37, 1998, pp. 197-201.
  • S. Kocakuşak, H. J. Köroğlu, K. Akçay,  Ö.T. Savaşçı, R. Tolun,  Production of Sodium Perborate Monohydrate by Fluidized Bed Dehydration, Industrial & Engineering Chemistry Research, Vol 36, No:7, 1997, pp. 2862-2865.
  • S. Kocakuşak, H. J. Köroğlu, E. Ekinci, R. Tolun,  Anhydrous Borax Production by Microwave Heating,  Industrial  Ceramics, Vol 6, No: 3, 1996, pp. 185-188.
  • S. Kocakuşak, H. J. Köroğlu, T. Gözmen, Ö.T. Savaşçı, R. Tolun, Drying Wet  Borax Pentahydrate by Microwave Heating, Industrial & Engineering Chemistry Research, Vol 35, No: 1, 1996, pp. 159-163.
  • S. Kocakuşak, K.Akçay,  T. Ayok, H. J. Köroğlu, Ö.T. Savaşçı, R. Tolun, Production of Anhydrous, Crystalline Borax in Fluidized Bed, Industrial & Engineering Chemistry  Research, Vol 34, No:14, 1996, pp. 1424-1428.
  • S. Kocakuşak, T. Ayok, K. Akçay, H.J. Köroğlu, M. Koral, Ö.T. Savaşçı, R. Tolun, Production of Anhydrous, Crystalline Boron Oxide in Fluidized Bed Reactor, Chemical Engineering & Processing, Vol 35, No: 4, 1996, pp. 311-317.
  • S. Kocakuşak, H. J. Köroğlu, E. Ekinci, R. Tolun, Production of Anhydrous Borax Using Microwave Heating, Industrial & Engineering Chemistry Research, Vol 34, No: 3, March 1995, pp. 881-885.
  • Safiye N. Özdemir, İmdat Taymaz, Fatma G.B. San, Emin Okumuş, “Performance     assessment and optimization of the PEM water electrolyzer by coupled response surface methodology and finite element modeling”. Fuel 365 (2024) 131138.
  • Safiye N. Özdemir, İmdat Taymaz, Emin Okumuş, Fatma G.B. San, Fehmi Akgün, Optimization of operating parameters for boosting the performance of the PEMEC by the response surface methodology, Int. J. of Green Energy Vol 20, 2023 1861-1872
  • Safiye N. Özdemir, İmdat Taymaz, Emin Okumuş, Fatmagül Boyacı San, PEMEC performance evaluation through experimental analysis of operating conditions by response surface methodology (RSM), European Mechanical Science (2023) v7 16-21.
  • Safiye N. Ozdemir, Imdat Taymaz, Emin Okumus, Fatma Gül Boyacı San, Fehmi Akgün, Experimental investigation on performance evaluation of PEM electrolysis cell by using aTaguchi  Method, Fuel 344 (2023) 128021.
  • Erdör Türk B., Sarul M. H., Çengelci E., İyigün Karadağ Ç., Boyacı San F. G., Kılıç M., Okumuş E., Yazıcı M.S., “Integrated Process Control‐Power Management System Design and Flight Performance Tests for Fuel Cell Powered Mini‐Unmanned Aerial Vehicle,”   Energy Technology, vol. 9, no. 3, p. 2000879, 2021.
  • Boyaci San FG, Dursun S, Yazici MS, PtCo on continuous-phase graphene as PEM fuel cell catalyst, Int J. Energy Res. (2021), 45 (2), 1673-1684
  • Ay, S., Ozdemir, M. and Melikoglu, M. “Effects of metal promotion on the performance, catalytic activity, selectivity and deactivation rates of Cu/ZnO/Al2O3 catalysts for methanol synthesis”,Chemical Engineering Research and Design, 175: 146-160, (2021), DOI 10.1016/j.cherd.2021.08.039
  • Ay, S., Ozdemir, M. and Melikoglu, M. “Comparison of hydrogen consumption behavior of chromium and manganese promoted copper-based catalysts”, International Journal of Hydrogen Energy, 46: 29173-29182, (2021), DOI 10.1016/j.ijhydene.2020.11.204.
  • Ay, S., Ozdemir, M. and Melikoglu, M. “Effects of magnesium and chromium addition on stability, activity and structure of copper-based methanol synthesis catalysts”, International Journal of Hydrogen Energy, 46: 12857-12873, (2021), DOI 10.1016/j.ijhydene.2021.01.069.
  • Dursun S; Akay RG; Yazici MS, CVD Graphene Supported Cobalt (II) Phthalocyanine as Cathode Electrocatalyst for PEM Fuel Cells, International Journal of Hydrogen Energy (2020), 
  • Dursun S, Yazici MS, Mixed Carbon-Graphene Supports for Cobalt (II) Phthalocyanine as Fuel Cell Cathode, ECS J. Solid State Sci. Technol., 2020, 9, 4.
  • Bahar T, Yazici MS, Assessment of glucose oxidase based enzymatic fuel cells integrated with newly developed chitosan membranes by electrochemical impedance spectroscopy, Electroanalysis 2020, 32,1304-1314 DOI: 10.1002/elan.201900743
  • Yazici MS; Boyaci San FG, Bor doplu CVD grafen üretimi ve yakıt pili performansı, Bor Dergisi (Journal of Boron), 4 (3), 141-147, 2019.
  • Boyaci San FG, Dursun S, Yazici MS, Optimization of the PEMFC operating parameters for cathode in the presence of PtCo/CVD graphene using factorial design, Int J Energy Res. 2019; P 4506-4519.
  • Bahar T, Yazici MS, Performance Assessment of a Perfluorosulfonic Acid-type Membrane (i.e. Nafion™ 115) for an Enzymatic Fuel Cell, Electroanalysis, 31, 1656-1663, 2019.
  • Yazici MS; Azder MA, Salihoglu O; Boyaci San FG, Ultralow Pt loading on CVD graphene for acid electrolytes and PEM fuel cells, International Journal of Hydrogen Energy 43, pages 18572-18577(2018).
  • Yazici MS; Azder MA, Salihoglu O, CVD grown graphene as catalyst for acid electrolytes, International Journal of Hydrogen Energy 43, pages 10710-10716(2018).
  • Bahar T, Yazici MS, Immobilized glucose oxidase biofuel cell anode by MWCNTs, ferrocene, and polyethylenimine: Electrochemical performance. Asia‐Pac J Chem Eng. 2018; V13, p. 2149.
  • Boyaci San FG,  Okur O. 2017. The effect of compression molding parameters on the electrical and physical properties of polymer composite bipolar plates. International Journal of Hydrogen Energy, 42, 23054-23069.
  • Okumus E, Boyaci San FG, Okur O, Erdor Türk B, Çengelci E, Kılıç M, Iyigun Karadag Ç, Çavdar M., Turkmen A., Yazıcı MS.  2017. Development of boron-based hydrogen and fuel cell system for small unmanned aerial vehicle.  International Journal of Hydrogen Energy, 42, 2691-2697
  • Boyaci San FG,  Iyigun Karadag Ç,  Okur O, Okumus E. 2016. Optimization of the catalyst loading for the direct borohydride fuel cell. Energy, 114:214-224
  • İyigün Karadağ Ç., Behmenyar G., Boyacı San F. G., Şener T., 2015. Investigation of Carbon Supported Nanostructured PtAu Alloy as Electrocatalyst for Direct Borohydride Fuel Cell, Fuel Cells,15, No. 2, 262–269.
  • Boyaci San FG,  Okur O, Iyigun Karadag Ç,  Okumus E. 2014. Optimization of the Operation Conditions in a Direct Borohydride Fuel Cell with Carbon Supported Au Anode. Chapter in book: Progress in Exergy, Energy, and the Environment, January pp.927-935.
  • Boyaci San FG,  Okur O, Iyigun Karadag Ç,  Isık Gulsac I,  Okumus E. 2014 Evaluation of operating conditions on DBFC (direct borohydride fuel cell) performance with PtRu anode catalyst by response surface method. Energy: 71 160-169.
  • Okur O, Iyigun Karadag Ç, Boyaci San FG, Okumus E, Behmenyar G, 2013. Optimization of parameters for hot-pressing manufacture of membrane electrode assembly for PEM (polymer electrolyte membrane fuel cells) fuel cell, Energy 57:574-580.
  • Boyaci San F.G, Isik Gulsac I, Okur O. 2013. Analysis of the polymer composite bipolar plate properties on the performance of PEMFC (polymer electrolyte membrane fuel cells) by RSM (response surface methodology). Energy 55:1067-1075.
  • Boyaci San FG, Isik-Gulsac, I, 2013. Effect of surface wettability of polymer composite bipolar plates on polymer electrolyte membrane fuel cell performances. International Journal of Hydrogen Energy: 38(10):4089–4098.
  • Boyaci San F.G, Tekin G., 2013, A review of thermoplastic composites for bipolar plate applications, International Journal of Energy Research, Submitted (ER-12-2623),16-Feb-2012.
  • Celik C, Boyaci San F. G., Sarac H. I. 2012. Investigation of Ni Foam Effect for Direct Borohydride Fuel Cell, Fuel Cells 12(6) 1027–1031.
  • Taymaz, I., Akgun, F., Benli,M., 2011. Application of response surface methodology to optimize and investigate the effects of operating conditions on the performance of DMFC, Energy 36, 1155-1160.
  • Çelik, C., Boyacı San, FG, Sarac,H.İ., 2010. Improving the direct borohydride fuel cell performance with thiourea as the additive in the sodium borohydride solution, International Journal of Hydrogen Energy, 35, 16,  8678-8682.
  • Çelik, C, Boyacı San, F.G., Sarac,H.İ., 2010.  Influences of sodium borohydride concentration on direct borohydride fuel cell performance”, J. Power Sources, 195, 2599-2603.
  • Çelik, C, Boyacı San FG, Sarac,H.İ., 2008, Effects of operation conditions on direct borohydride fuel cell performance, Journal of Power Sources 185, 197–201.